Including sE’s Isolation Pack, RF-X Reflexion Filter, and a 3-metre XLR cable, the sE Electronics X1 S Studio Bundle is everything you need to start recording - right now!
The Ultimate Studio Pack to Start Recording
Whether you're in the studio, podcasting, lead vocal, rap recording, or taking the road for field recording, the sE Electronics X1 S Studio Bundle represents the next generation of recording on a budget with uncompromising results!
sE Electronics X1 S Studio Bundle Contains:
- X1 S microphone
- RF-X Reflexion Filter
- sE Isolation Pack (with pop shield)
- 3-Metre mic cable
Hand-Crafted Condenser Microphone
With a hand-crafted and individually-tuned 1" capsule and the highest dynamic range and SPL handling capabilities in its class, the sE Electronics X1 S Microphone has the sound and features you'd expect from a serious high-end studio mic, at only a fraction of the cost.
Introduced in 2010, the X1 condenser redefined the potential of an affordable hand-engineered condenser microphone. With the highest dynamic range and SPL handling capabilities in its class, the X1 S is a refined version of this modern classic, improved in almost every way - and just as affordable as the original.
sE Electronics X1 S Key Features:
- True Condenser Technology
- Hand-made gold-sputtered capsule
- The capsule is made of metal – no plastic parts
- In-house developed and in-house manufactured capsule
- State of the art SMT components for short signal path, highest dynamic range and maximum reliability
- Unlike other microphones, the X1 S offers a very smooth and balanced sound
- A bit higher sensitivity helps to stand out against other mics
Two switchable attenuation pads prevent the X1 S from overloading any audio interface or mixer when miking loud sources. Two switchable low cut filters at 80Hz or 160Hz are ideal to filter rumble and foot-fall noise or compensate for proximity effect.
The SE X1 S also features best-in-class SPL capability and the highest dynamic range to date. The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums.
Unlike the cheaply constructed bodies of some other "entry-level" microphones, the X1 S's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come!
sE's industry-standard RF-X Reflexion Filter is included to provide an instant vocal booth for any home studio, letting you capture great-sounding recordings anywhere. With its lightweight body and efficient clamp assembly, the RF-X is simplicity itself, providing unbeatable performance and ease of use.
The multi-layer design differentiates sE's Reflexion Filters from their competitors by filtering frequencies evenly across the whole spectrum, helping to ensure that recordings exhibit near-zero colouration when using the filter, thus providing completely natural recordings in any environment.
Premimum sE Isolation Pack
For situations where greater rumble control and ‘plosive protection is desired, this bundle also includes sE’s Isolation Pack. The quick-release mechanism at the base of this shock mount makes it easy to insert and remove a mic – no screws, no hassle, just one twist to secure or release.
And the integrated metal pop filter can be vertically positioned to accommodate any compatible microphone, or completely removed from the shock mount if desired.
sE Electronics X1 S Microphone Specs:
- Capsule Type: Hand-Crafted 1" True Condenser
- Polar Pattern: Cardioid
- Frequency range: 20 Hz - 20 kHz
- Sensitivity: 30 mV/Pa (-30.5 dBV)
- Max SPL: 140 / 150 / 160 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)
- Equivalent noise level: 9 dB(A)
- Dynamic range: 131 / 141 / 151 dB (0/10/20 dB Attentuation pad)
- Signal to Noise Ratio: 85 dB
- Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable
- Attenuation Pad: 10 / 20dB, switchable
- Powering: 48 Volts according to IEC 61938
- Electrical Impedance: 125 Ohms
- Recommended load impedance: >1k Ohms
- Current consumption: 6 mA
- Connectivity: 3-pin male XLR connector
- Dimensions: Diameter: 58mm (2.28 in), Length 169mm (6.65 in)
- Weight: 445 g (15.70 oz.)
|Shipping Weight (kg)||4.000000|
We know you want to get your gear as quickly and as safely as possible, Next Working Day Delivery to UK Mainland Addresses, on all IN STOCK items, if ordered before 3pm. This will include a text or email on the day of delivery giving you an exact hour window of when your gear will be with you.Orders under £99: £4.99 Delivery Charge
Orders over £99: Free Next Day DPD Delivery (When Ordered before 3pm)
Weekend Delivery (Saturday-Sunday): £9.99 (When Ordered before 3pm Friday)
Heavy Items (over 40kg): £39.99 Pallet Service
Rather not wait in for the delivery? Don’t worry, we’ve got you…In Stock items can be ordered and paid for in-advance Online via our Click & Collect service. As long as if it's in stock at your chosen branch, you can collect the item within 2 hours*.
If you have bought something In-Store or Online and want to return it as unwanted, you have 30 days from when you receive the goods to contact our PMT experts either by phone or email to return your item.
We can offer you a refund if you return your item within 30 Days from purchase date and with 100% perfect packaging.
Please Note - We cannot accept unwanted returns on microphones, any in-ear earphones or monitors, and any other items that touch your mouth, nose or inner ear if you have removed the hygienic packaging.