Tama Star Walnut 4pc Shell Pack, Cinnamon Japanese Chestnut
Availability: OUT OF STOCK
Available to Order from our Suppliers
The Tama Star Walnut 4pc drum shell pack, seen here in the gorgeous Garnet Japanese Sen Burst, is a premium set of shells from Tama’s flagship line.
Naturally EQ’d Tone of Walnut in Tama’s Flagship Line
Tama’s Star line of drum shells is their flagship line. To create these shells, Tama have taken their years of knowledge and research of drum making and re-examined every detail.
As a result, you get finely crafted drum shells with beautifully enhanced resonance.
What’s more, they’re crafted from Walnut so you can enjoy that amazing, naturally EQ’d tone.
Tama Star Walnut Key Features:
- STAR Bearing Edges
- Super Resonant Mounting System
- Quick-Lock Tom Brackets
- Minimum Shell Contact Lugs
- STAR Floor Tom Legs
- Hold Tight Washers
- Remo Drum Heads
- Hardware Pack & Cymbals Not Included
- 22" x 16" Bass Drum
- 10" x 7" Tom Tom
- 12" x 8" Tom Tom
- 16" x 16" Floor Tom
- Tom Toms and Floor Toms Batter Side: Remo Coated Ambassador
- Tom Toms and Floor Toms Bottom Side: Remo Clear Ambassador
- Bass Drum Batter Side: Remo Coated Powerstroke 3
- Bass Drum Front Side: Remo Fiberskyn Powerstroke 3 Diplomat
Star Bearing Edge
Tama Star drums have a round peak bearing edge which provides more contact between the shell and drum head.
Furthermore, with the peak position of the edge at 3.5mm from the shell’s outer surface, these shells benefit from even more improved contact between the drumhead and drum.
Walnut - Great for Stage and Studio
Walnut is an extremely popular wood with furniture makers because of its natural beauty and incredible durability.
In the drumming world, it is well loved for both these reasons and the fact that it delivers amazing, naturally EQ’d tone.
Drum tone aficionados often favour Walnut due to its distinctively warm and fat sound. This unique tone along with its booming low end and projection make it so Walnut drum kits cut through any mix making their perfect for both stage and studio.
Specially Designed Lugs for Minimum Shell Contact
Knowing that every single piece of hardware attached to the shells will affect their tone and resonance, Tama took special consideration when designing the Star drum line to achieve optimal sound.
Newly designed lugs were made especially for Tama Star drums, providing fantastic, premium looks with an extremely low mass bridge construction which ensures minimum contact with the shell. The bass drum claw hooks even “float” on the surface of the hoops.
Furthermore, these shells also feature an eye-catching imprinted badge along with a small wooden air hole grommet, further reducing the weight of materials on the shells thus improving their tone and resonance.
Super Resonant Mounting System
To get the most out of your drums’ natural resonance, the toms should be mounted with as small amount of stress on the shells and hoops as possible.
To achieve this, Tama Star drums boast the Super Resonant Mounting System; a completely new mounting concept.
Utilising a patented system, the shells feature a unique weight support with which dramatically reduces stress on the shell and hoop while increasing the natural resonance.
In addition to this, the shells also have rubber at each contact point between the shell and mounting system, isolating the shells and minimising vibration transference.
Die-Cast Hoops and Hold Tight Washers
Die-cast zinc hoops are used on these drum shells. Manufactured using injection moulded molten metal, these die-cast hoops denser and much more consistent in shape than standard triple-flanged hoops which are made by bending metal plates.
Because of this density and consistency, these die-cast hoops make tuning easier while keeping the drums in tune longer.
These hoops also provide beautifully crisp attack, great projection, increased focus and powerful tone.
As a result, you get rich, resonant shells with full-bodied, well-balanced sound.
Hold Tight washers are also used with the Tama Star shells. These patented washers feature rubber rings that absorb impact from vibration while keeping the tension rods in contact with the hoops to prevent the tension rods from loosening.
Specially Designed Tom Drum Legs and Bass Drum Spurs
Since floor toms are usually positioned vertically, the legs absorb a lot of the impact as it comes down.
With this in mind Tama have designed Star floor tom legs to have a special, hollow, soft rubber construction. As a result, impact is absorbed differently, enhancing sustain and the drum’s natural resonance.
This special construction also enhances playability with the feet providing a comfortable feel and response to your drumming.
The bass drum spurs feature a similar concept and are made with soft, high-mass rubber feet.
Furthermore, the bass drum spurs feature a unique 2-piece construction that gives you all the benefits of the rubber feet and the secure stability of metal spikes.
Beautiful by Sight and Sound
This fantastic drum shell kit is beautifully in every way from the way it looks to the way it sounds and the intricacy of its top-tier design.
To perfectly complement this drum shell kit, you may also want to purchase the Tama Star Walnut snare drum.
Please note that this shell pack does not include hardware or cymbals.
Buy the Tama Star Walnut 4-piece drum shell pack from PMT Online now to get the beauty of Walnut shells with the cutting-edge drum crafting of the Tama Star series.
|Shipping Weight (kg)||8.000000|
|Hardware / Cymbals||hardware and cymbals not included|
|Bass Drum Size||22" x 16"|
|Floor Tom Size||16" x 16"|
|Rack Tom Size||10 x 7", 12 x 8"|
|Shell Count||4 piece kit|
We know you want to get your gear as quickly and as safely as possible, Next Working Day Delivery to UK Mainland Addresses, on all IN STOCK items, if ordered before 3pm. This will include a text or email on the day of delivery giving you an exact hour window of when your gear will be with you.Orders under £99: £4.99 Delivery Charge at Checkout
Orders over £99: Free Next Day Delivery
Weekend Delivery (Saturday-Sunday): £9.99 (When Ordered before 3pm Friday)
Rather not wait in for the delivery? Don’t worry, we’ve got you…In Stock items can be ordered and paid for in-advance Online via our Click & Collect service. As long as if it's in stock at your chosen branch, you can collect the item within 2 hours*.
If you have bought something In-Store or Online and want to return it as unwanted, you have 30 days from when you receive the goods to contact our PMT experts either by phone or email to return your item.
We can offer you a refund if you return your item within 30 Days from purchase date and with 100% perfect packaging. For more information and T&Cs, click the Returns link above!