Presonus Temblor T10 Active Studio Subwoofer

Active Studio Subwoofer

PreSonus have designed the Temblor T10 active subwoofer to deliver lightning fast, precise transient response with extended and clear low frequencies without overshoot.

The results are a studio subwoofer that perfectly complements your full-range monitors without detracting or overshadowing them.

Achieve that perfect mix by naturally extending your system’s range to get that full low end.

When designing the Temblor T10 active subwoofer, PreSonus opted for a 10”, front firing glass-composite low-frequency driver which, due to its rigid yet lightweight cone, delivers incredibly tight and responsive bass.

Using this glass-composite also means that you get a much lower distortion than what you find with other materials so you get a fantastic, clear sound to match your full-range monitors, perfect for use in the studio.

Further ensuring an incredibly accurate listening experience, the Temblor T10 provides a continuously variable low pas filter (50Hz – 130Hz) allowing for a perfectly seamless crossover between your full-range studio monitors and the subwoofer.

Comprehensive Connectivity and Control Options

On the rear of the PreSonus Temblor T10 studio subwoofer, you’ll find a host of connectivity and control options allowing the sub to act as the central hub of your monitoring operations.

With a switchable high pass filter, that removes frequency content below 80Hz, on each of the full-range outputs you can avoid frequency cancellation while reinforcing the subwoofer’s higher range. Furthermore, polarity invert ensures your system is in phase.

A/B testing with and without your sub frequencies is made easy with the included momentary footswitch so you can make quick comparisons to determine the best mix across a wide range of systems.

In addition to left and right balanced XLR and ¼” TRS outputs, there is a XLR subwoofer output allowing you to connect a second Temblor T10. When it comes to the inputs, there are left and right, balanced XLR and ¼” inputs along with unbalanced RCA main inputs.

Get the Perfect Mix

The only way to achieve the perfect mix is to get the most accurate representation of your audio in the studio.

Allowing you to get that awesome mix that sounds great across all systems, ensuring the listener hears your work the way you intended it to be heard, PreSonus bring you the Temblor T10 active studio subwoofer.

PreSonus Temblor T10 Active Studio Subwoofer Key Features:

• 10” Front Firing Glass-Composite Frequency Transducer
• Front Firing Bass-Reflex Acoustic Port
• Input Gain Control
• Continuously Variable Lowpass Filter
• Built-In Crossover
• Switchable High Pass Filter on All Full-Range Outputs
• Momentary Footswitch Included
• Internal Damping and Heat Sink
• Integrated Rubber Feet for Stable Placement

PreSonus Temblor T10 Active Studio Subwoofer Specs:

Inputs

• 2-Balanced XLR
• 2-Balanced ¼” TRS
• 2-Unbalanced RCA

Outputs

• 2-Balanced XLR (Full Range with 80Hz HPF Option)
• 2-Balanced ¼” TRS (Full Range with 80Hz HPF Option)
• 1-Balanced XLR (Sub Out)

Performance

• Frequency Response: 20Hz – 200Hz
• Low Pass Filter Frequency: 50Hz – 130Hz (Variable)
• Signal-to-Noise Ratio: >98 dB (A Weighted)
• THD: 0.019% @ Power <160W
• Amplifier Power: 250W Peak, 170W RMS
• Power Consumption: 230W
• Amplifier Type: Class AB
• Peak SPL at 1m: 113 dB
• Woofer: 10” Glass-Composite, Front Firing
• Acoustic Port: Front Firing Bass Reflex

User Controls

• Input Gain Range: -30 to +6 dB
• Polarity Switch: 0 Degrees to 180 Degrees
• Low Pass Filter Control: 50Hz to 130Hz
• Ground Lift Switch: On/Off
• High Pass Filter Switch: On/Off
• Bypass Footswitch: On/Off

Protection

• RF Interference
• Output-Current Limiting
• Over-Temperature
• Turn On/Off Transient
• Subsonic Filter
• External Main Fuse

Power

• 100 – 120V ~ 50/60Hz or 220 – 240V ~ 50/60Hz

Cabinet

• Vinyl-Laminated MDF

Dimensions and Weight

• Width: 12.6” (320mm)
• Depth: 15.75” (400mm)
• Height: 15.75” (400mm)
• Weight: 39.46lbs (17.9kg)