Neumann MA 1 Monitor Alignment Microphone

Unleash the true potential of your studio with the Neumann MA 1 Monitor Alignment, and say goodbye to the complexities of room correction and welcome an effortless solution that brings unparalleled audio precision right to your fingertips. With an individually calibrated measurement microphone and user-friendly software, it's as if you have a seasoned engineer right in your studio.

Elevate your studio's audio capabilities with the Neumann MA 1 Monitor Alignment, it's the shortcut to professional sound quality, ensuring that your music production and monitoring experience is nothing short of extraordinary.

Key Features:

• Elevate Your Sound - The Neumann MA 1 Monitor Alignment is your key to achieving the best sound quality, whether you're in a home studio or a professional control room. This cutting-edge software automatically calibrates your stereo monitors, transforming your mixing, mastering, and monitoring into a world-class experience.
• Effortless Calibration - Advanced calibration algorithms take the guesswork out of the equation, ensuring that you achieve exceptional results regardless of your studio's acoustics or your level of expertise. You no longer need to be an acoustic expert to achieve remarkable sound quality. The MA 1 Monitor Alignment kit does the heavy lifting for you.
• Streamlined Setup - Forget about the hassle of dealing with special drivers or additional plug-ins. The alignment data is seamlessly stored directly into your DSP-powered monitors. Using the software, you can effortlessly adjust phase and amplitude to meet your specific needs. The result is pristine sound without the need for a steep learning curve or extensive acoustic knowledge.

Please note: The software requires Windows 10 64 Bit and ASIO driver or macOS 10.13/10.14/10.15 or 11.0.

Neumann MA 1 Monitor Alignment Specifications:

• Acoustical operating principle: Pressure transducer
• Directional pattern: Omnidirectional
• Frequency range: 20Hz – 20kHz
• Sensitivity at 1kHz into 1 kohm: 30 mV/Pa -30dBv +/- 3dB uncalibrated | 30 mV/Pa -30dBv +/- 0.5dB calibrated (via software)
• Rated impedance: 50 ohms
• Rated load impedance: 1000 ohms
• Equivalent noise level, CCIR: 39dB
• Equivalent noise level, A-weighted: 27 Db-A
• Maximum SPL for THD 0.5: 132dB
• Signal-to-noise ratio, CCIR (re. 94 dB SPL): 55dB
• Signal-to-noise ratio, A-weighted (re. 94 dB SPL): 67 dB
• Maximum output voltage: 10dBu
• Supply voltage (P48, IEC 61938): 48V +/- 4V
• Current consumption (P48, IEC 61938): 3 mA
• Matching connector: XLR3F
• Weight: 37g
• Diameter: 23mm
• Length: 117mm