Austrian Audio MiCreator System Set

The Austrian Audio MiCreator Studio is a USB microphone for a wide range of applications. Thanks to its cardioid characteristic, the microphone is perfect for voice and instrumental recordings and suppresses sound hitting the back of the microphone to the maximum. It has also been designed to be placed on a table or stand. For this purpose, there is a 3/8" thread on the underside, which can be enlarged to a 5/8" thread if required using the thread adapter supplied.

Thanks to the rubber feet, which are also located on the underside, the MiCreator Studio microphone always stands securely on flat surfaces. Nevertheless, it can also be used as a hand-held microphone, as a vibration-mounted capsule has been installed to provide optimum insulation against structure-borne noise. Regardless of where and how the microphone is positioned, it always makes sense to point the swivel head towards the source to be recorded. To counteract unwanted effects, the MiCreator Studio has an internal pop protection, which can be replaced by an optional pop protection (e.g. Austrian Audio OCP8) if it is not sufficient.

Key Features:

• Cardioid Characteristic - Ideal for voice and instrumental recordings, effectively suppresses sound from the microphone's back.
• Versatile Placement - Designed for table or stand placement with a 3/8" thread, expandable to 5/8" using the supplied thread adapter.
• Rubber Feet - Ensures stability on flat surfaces; can also be used as a handheld microphone with a vibration-mounted capsule.
• Swivel Head - Allows flexible positioning; internal pop protection with an option for additional pop protection (e.g., Austrian Audio OCP8).

Austrian Audio MiCreator System Set Specifications:

• MiCreator Studio:
• Max. Sampling rate: 48kHz at 24Bit
• Equivalent self-noise: 22dBSPL(A) (gain "high")
• Headphone output (out) (TRS/TRRS):
• Output power: 45 mW (32 Ohm load)
• Dynamic range: 89 dB(A)
• Input/output (in/out) (TRRS):
• Input gain: 0 dB ("low")/20dB ("high")
• Frequency range: 10 Hz - 20 kHz Power supply for microphones: 3.9 V via 2.7 kO
• Input impedance with instrument cable: 135 kO (input gain "low")
• Maximum input level with instrument cable <0.1% THD: +10 dBu (input gain "low")
• Dimensions (H x W x D): 155 x 60 x 37mm
• Weight: 370g
• MiCreator Satellite:
• Equivalent self-noise: 22 dB SPL(A)
• Dimensions (H x W x D): 100 x 60 x 28mm
• Weight: 220g