Sennheiser ewD1-ME3-H-UK Headmic Set

Sennheiser makes some of the best and most reliable wireless systems for live performance and this evolution wireless D1 Headmic-Set with ME 3-II headmic for live stage use is no different! It can run up to 15 output lines in parallel and independently adjust the sensitivity of every transmission.

Features

• Lightweight and robust: headset microphone for excellent speech intelligibility
• Up to 15 compatible channels (under optimal conditions) in license-free 2.4 GHz band
• Automatic frequency management
• Prevents interference: Intelligent channel back-up allows co-existence with Wi-Fi & Bluetooth
• Audio effects: equalizer, de-esser, automatic gain control
• iOS & Android app for remote control and monitoring of the system
• Sturdy metal housing

Technical Data

System

• RF frequency range    2,400 to 2,483.5 MHz   
• Dynamic range    > 135 dB (A)   
• THD, total harmonic distortion    typ. < 0,1 %   
• Audio sampling    24 bit/48 kHz   
• Signal-to-noise ratio     105 dB (A)   
• Modulation    GFSK with back channel   
• Transmission method    TDMA, time diversity, frequency diversity, fast switching antenna diversity   
• Latency    3.9 ms   
• Audio codec    APT-X Live   
• Operating temperature    Operation: – 10 °C to +55 °C   
• Storage temperature    Storage: – 20 °C to +70 °C (The temperature range is influenced by the battery characteristics)   
• Frequency response    20 to 20.000 Hz   

EM D1

• Latency    multi-frequency targets   
• RF sensitivity    <-90 dBm   
• RF output power    back channel 10 mW/100 mW (country-specific)   
• Audio output    Mic/line level switch –24 dB/0 dB, XLR, balanced max +18 dBu, Jack, unbalanced/balanced max +12 dBu/max +18 dBu   
• Low-cut filter    –3 dB at 120 Hz   
• Equalizer    7-band graphic equalizer   
• Automatic gain control (AGC)    compression/expansion with automatic make-up gain function   
• Display    OLED   
• Connection    XLR/¼" (6.3 mm) jack   
• Antenna connector    2 x Rev-SMA   
• Network socket    RJ45   
• Network protocol    Media Control Protocol, TCP/IP IPv4 (DHCP, Manual)/IPv6   
• Power supply    12 V DC hollow jack   
• Current consumption    350 mA   
• Weight    approx. 824 g   

SK D1

• RF output power    adaptive, up to 100 mW (country-specific)   
• Connection    3.5 mm jack socket, lockable   
• Weight    approx. 85 g (w/o batteries)   
• Microphone    Frequency response: 50 to 20,000 Hz   
• Max. input level: 2.2 V RMS   
• Line Frequency response: 20 to 20,000 Hz   
• Max. input level: 3.3 V RMS   
• Input impedance    1 M   
• Input sensitivity    automatic sensitivity adjustment   
• Battery Specification    2 x AA size battery (1,5V), Operating time: typ. 6 h   
• Accupack    BA 30 (Li-Ion, 3.7V), Operating time: typ. 11 h   

ME 3 II

• Microphone    pre-polarized condenser   
• Sensitivity    1.6 mV/Pa   
• Pick-up pattern    cardioid   
• Max. sound pressure level    150 dB SPL   

What's in the box?

• EM-D1 rackmount receiver
• SK-D1 bodypack transmitter
• ME 3-II headset microphone
• NT-12 power supply
• Transport Case
• User Manual