The Blackstar HT-5RS Mini Stack combines the HT-5RH head with two 1x12 Blackstar voiced speaker cabinets. This award winning guitar amp and cabinet combination is fully equipped for studio use or for practice at home. It features stereo reverb, dedicated tone control on the clean channel and all the other features available across the HT-5 range.
Last Chance to Buy
Two Footswitchable Channels
The HT-5R has two channels available for selection, a Clean channel and an Overdrive channel. Using the Volume control while on the Clean channel you are able to deliver everything from a clean sound through to a crunch tone. Alternatively you can select the Overdrive channel and again using the Gain control, change from a clean sound on the edge of breakup right through to a distorted lead tone.
5 Watt, Push-Pull Design
The HT-5 power amplifier is a low powered push-pull design which produces the crunch and break-up characteristics of a traditional 100W output stage, but at a much lower volume. This is achieved by the use of a 12BH7 dual triode valve in push-pull configuration producing 5 Watts output, which is rich in valve harmonics and compression, sounding full and toneful even at the lowest volume level.
The HT-5C and HT-5R models both feature a Blackstar custom voiced 12inch 50W speaker.
The reverb control sets the overall level of the reverb effect. With the control fully counter clockwise there will be no reverb. Turning the control clockwise will increase the amount of reverb.
Speaker Emulated Output
The Blackstar emulated output design is a new benchmark for pro direct recording. This no-compromise design makes it easy to get your tone to disk and tape. You can also use it to run a line out to a PA.
The ISF control works in conjunction with the Tone control. It allows you to choose the exact tone signature you prefer. Fully CCW is a more American characteristic with a tight bottom end and more aggressive middle, and fully CW is a British characteristic which is more ‘woody’ and less aggressive.
- Innovative 5 Watt valve head
- 1xECC83 and 1x12BH7 valves
- Unique push pull power amp design
- Award winning HT Pedal preamp
- Two footswitchable channels
- Two 1x12" speaker cabinets loaded with custom designed 50W speakers
- Enhanced tone controls
- Patented Infinite Shape Feature (ISF)
- Digital Stereo Reverb
- Fully equipped for studio or practice
- Speaker emulated output with 1x12 or 4x12 voicing
- Effects loop with effects level switch
- Footswitch included
- Cool vintage styling
We constantly monitor our competitors' prices to ensure that we're the best. However if you do find it cheaper, you can request an instant price match during opening hours by completing the form below.
*Please note that Terms & Conditions apply to Price Match - Must be a UK-based seller with the item In Stock, is not a Marketplace-based seller (like Amazon or Ebay), and is not available in conjunction with Finance or other Offers*. All Price Match transactions are at the discretion of PMT Online, and we reserve the right to withdraw the Price Match at any time.