The HT-1RH is the perfect amp, packing all the great tone and innovative features of the award-winning HT-5 valve amp into a 1 Watt format. The patented ISF (Infinite Shape Feature) circuit gives you infinite adjustment over the characteristics of the tone control network and takes you from the USA to the UK and anywhere in between. Add a fully specified speaker emulated output, MP3/ Line Input and you have everything you need for recording or practicing.
1 Watt, Push/Pull Design
The HT-1 power amplifier is a low powered push-pull design which produces the crunch and break-up characteristics of a traditional 100W output stage but at a much lower volume. This is achieved by the use of an ECC82 dual triode in push-pull configuration producing 1 Watt output, which is rich in valve harmonics and compression, sounding full and toneful even at the lowest volume level.
The HT-1 has two channels available for selection, a Clean channel and an Overdrive channel. Using the Gain control while on the Clean channel you are able to deliver everything from a clean sound through to a crunch tone. Alternatively you can select the Overdrive channel and again using the Gain control, change from a clean sound on the edge of breakup right through to a distorted lead tone.
The reverb control sets the overall level of the reverb effect. With the control fully counter clockwise there will be no reverb. Turning the control clockwise will increase the amount of reverb.
The ISF control works in conjunction with the Tone control. It allows you to choose the exact tone signature you prefer. Fully CCW is a more American characteristic with a tight bottom end and more aggressive middle, and fully CW is a British characteristic which is more 'woody' and less aggressive.
Speaker Emulated Output
The Blackstar emulated output design is a new benchmark for pro direct recording. This no-compromise design makes it easy to get your tone to disk and tape. You can also use it to run a line out to a PA.
Blackstar HT-1RH Amp Head and HT-112 Cab Highlights
- Innovative 1 Watt valve head
- 1xECC83 and 1xECC82
- Unique push-pull power amp design
- Based on award winning HT-5
- Two channels
- Patented Infinite Shape Feature (ISF)
- Perfect for studio or practice
- Speaker emulated output
- Stereo MP3 / Line input
- External speaker output
- Stereo Reverb
HT-1RH Amp Head
- Product Range: HT-1
- Model: HT-1RH
- Technology Type: Valve
- Preamp Valves: 1 x ECC83, 1 x ECC82
- Wattage: 1
- Inputs: Guitar Input, MP3/Line Input
- Controls: Gain, Overdrive Select, Volume, ISF, Speaker Emulated Output and Headphones, MP3/Line In, Reverb
- Channels: 2 - Clean, Overdrive
- Weight: 4KG
- Dimensions (Width x Height x Depth): 308 x 305 x 172 (mm)
HT-112 Extension Cabinet
- Equipped with 1 x 12" Blackbird 50 speaker for loud & clear projection
- For use with HT series
- High quality construction for quality sound
- Limited edition blonde finish creates vintage appearance
- Series: HT
- Power: 50W
- Impedance: 16
- Speaker: 1 x 12" Blackbird 50 custom designed by Blackstar
- Weight: 10.73kg
- Dimensions: 443 x 249 x 444 (mm)
|Woofer Size||12" woofer|
|Power||50 watt speaker, 1 watt amplifier|
|Amp Type||valve / tube amplifier|
October 29, 2009Read Article
We constantly monitor our competitors' prices to ensure that we're the best. However if you do find it cheaper, you can request an instant price match during opening hours by completing the form below.
*Please note that Terms & Conditions apply to Price Match - Must be a UK-based seller with the item In Stock, and is not available in conjunction with Finance or other Offers*