The HT METAL 1 is the perfect metal guitar amp. Using the HT-1R as a starting point, the HT METAL 1 gets a complete overhaul. Delivering an ultra high gain amp that’s designed to meet the demands of today’s metal guitarists. The ISF circuit gives you infinite adjustment over the characteristics of the tone. Taking you from classic British metal, to modern US scooped high gain. Add a fully specified speaker emulated output, MP3/Line input, plus a 4-16 Ohms speaker output and you have everything you need for recording or practicing.
Custom Metal Cosmetics
The HT METAL series all feature custom cosmetics designed more for metal guitarists. All the range feature black knobs, metal panel, metal logo and on some models a custom metal grille.
1 Watt, Push-Pull Design
The HT-1 power amplifier is a low powered push-pull design which produces the characteristics of a 100W at a much lower volume. This is achieved by the use of an ECC82 dual triode which is rich in valve harmonics and compression. sounding full and toneful even at the lowest volume level.
The HT-1 has two channels available for selection, a Clean channel and an Overdrive channel. Using the Gain control while on the Clean channel you are able to deliver everything from a clean sound through to a crunch tone. Alternatively you can select the Overdrive channel and again using the Gain control, change from a clean sound on the edge of breakup right through to a distorted lead tone.
Featuring an 8inch speaker, the HT-1 really is a perfect combo amp for home or studio use. The aim was to create an amp which sounded full and toneful even at the lowest volume level.
The ISF control works in conjunction with the Tone control. It allows you to choose the exact tone signature you prefer. Counter clockwise is a more American characteristic with a more aggressive mid range. Fully CW is a British characteristic which is more ‘woody’ and less aggressive.
Speaker Emulated Output
The Blackstar emulated output design is a new benchmark for pro direct recording. This no-compromise design makes it easy to get your tone to disk and tape. You can also use it to run a line out to a PA.
The reverb control sets the overall level of the reverb effect. With the control fully counter clockwise there will be no reverb. Turning the control clockwise will increase the amount of reverb.
- Innovative 1 Watt valve combo
- Specially voiced for metal guitar
- Extreme gain and tone
- 1 x ECC83 and 1 x ECC82
- Unique push-pull power amp design
- Based on the award winning HT-1R
- Two channels
- Custom metal styling
- 8" speaker
- Patented Infinite Shape Feature (ISF)
- Perfect for studio or practice
- Stereo MP3/Line input
- Speaker emulated output
- External speaker output
- Stereo reverb
- Metal grille
|Amp Type||valve / tube amplifier|
We constantly monitor our competitors' prices to ensure that we're the best. However if you do find it cheaper, you can request an instant price match during opening hours by completing the form below.
*Please note that Terms & Conditions apply to Price Match - Must be a UK-based seller with the item In Stock, and is not available in conjunction with Finance or other Offers*