Orange Rockerverb 50 MKIII Twin Channel Head, 50 Watts Class A/B

Orange Rockerverb 50 MKIII Twin Channel Head, 50 Watts Class A/B

by Orange
The new Orange Rockerverb 50 MKIII head carries on the tradition of the popular Rockerverb series, offering flexibility, great tones and ple..

Read More

£1,485.00
Trust Pilot Reviews
EXCELLENT
I was recommended PMT by my guitar instructor and was and dealt with mike who was the manager ,it was my first guitar I have ever bought and was blown away by the ships set up , very friendly and very relaxed atmosphere , I did explain my budget at the start but was I shown guitars that were close and way below my budget so I never felt that it was about a sale....just finding me the correct guitar, I was left alone to decide and with a bit of much needed guidance I've found my perfect first guitar and would highly recommended PMT and mike in particular Thanks for great experience Gary Douglas
Read Reviews

Overview

The new Orange Rockerverb 50 MKIII head carries on the tradition of the popular Rockerverb series, offering flexibility, great tones and plenty of power for live performers and recording artists. This all-valve guitar amp also features Orange's tube-driven spring reverb.

Celebrating its 10th Anniversary last year, the Rockerverb Series demonstrates better than anything else that a workhorse amp can be a master of all trades. The original Rockerverb was actually our first ever ‘high gain’ amplifier, with a unique voice that quickly became a firm favourite amongst the heavy crowd. However, its supreme versatility and dependability meant the series has been a mainstay for touring artists and session aces, both on the road and in the studio.

The MKIII also features the same footswitchable attenuator that has been so popular with users of our Thunderverb and Dual Dark Series amps.

The Clean channel has been revoiced on the new MKIIIs for a more ‘chimey’ response. The clean side now has even greater headroom than previous models, whilst still retaining the warmth and vintage character of a non-master volume design. Also, the valve driven spring reverb now has a more extensive range with a brighter trail. Add to this a host of other hidden refinements and you have the finest sounding and most feature-laden Rockerverb to date.

FEATURES

HIGHLY VERSATILE TWIN CHANNEL DESIGN

The original Rockerverb gained a cult following on account of its iconic high gain tones. The MKIIIs of course continue this tradition, but these amps are immensely flexible. The Dirty channel goes anywhere from classic British crunch to the very heaviest modern genres, and always maintains outstanding clarity. The non-master volume Clean channel has been re-engineered to take on a more ‘sparkly’ and ‘crisp’ nature but with greater control through a revoiced two band EQ section. The MKIIIs have even greater headroom and volume in full power mode should you need it, but this can now be manipulated with the amp’s output power and Attenuator controls.

FOOTSWITCHABLE VALVE DRIVEN SPRING REVERB

Driven by a single 12AT7/Ecc81 valve and a custom transformer, the spring reverb circuit in the MKIII has undergone significant upgrades. It is our richest sounding spring reverb design to date, with a more intuitive and usable sweep, ranging from subtle ‘air’ to full-on surf.

FOOTSWITCHABLE ATTENUATOR CONTROL

Output stage saturation at ‘conversation volumes’. The Attenuator circuit is located after the master volume controls and determines when and how the amp distorts after the preamp stage. This means the overall volume level can be reduced, whilst keeping control over the amp’s output clipping characteristics. Unlike a loadbox, our design ensures the all-important relationship between the output transformer and the speaker remains intact, so even at very low volumes the amp remains springy and responsive. Turning the Attenuator control clockwise reduces the overall output level (i.e. increases the attenuation), which can be remotely defeated via a footswitch for a volume boost on either channel for lead lines.

SWITCHABLE OUTPUT POWER

Switching the amp’s output power allows for more control over the headroom and breakup from the output valves. Reduce the output for greater output valve clipping and saturation at lower volume levels. The Rockerverb 50 MKIII features a ‘half power’ mode which drops the plate voltage on the output valves, reducing the output power to 25 Watts.

VALVE BUFFERED FX LOOP

For the purist who loves their pedals, our highly transparent effects loop is buffered by a single 12AT7/Ecc81, ensuring an all-valve signal path from input to output.

SPECS:

  • OUTPUT POWER: 50 WATTS: FULL POWER / 25 WATTS: HALF POWER
  • SPEAKERS OUTPUTS: 1×16 OHM OR 1 X 8 OHM OR 2 X 16 OHM
  • VALVES: PREAMP: 4 X ECC83/12AX7 & 2 X ECC81/12AT7 / POWER AMP: 2 X EL34
  • UNBOXED DIMENSIONS (W X H X D): 55 × 27 X 28CM (21.65 X 10.63 X 11.02IN)
  • UNBOXED WEIGHT: 20.75KG (45.75LB)

Specification

SKU134938
Weight20.7500
MPNROCKERVERB 50H MKIII
Power50 watts
Amp Typevalve / tube amplifier

See It In Action

Now Playing

views

Hear It In Action

No music has been added for this product yet.

Read About It

Trust Pilot Reviews
EXCELLENT
I was recommended PMT by my guitar instructor and was and dealt with mike who was the manager ,it was my first guitar I have ever bought and was blown away by the ships set up , very friendly and very relaxed atmosphere , I did explain my budget at the start but was I shown guitars that were close and way below my budget so I never felt that it was about a sale....just finding me the correct guitar, I was left alone to decide and with a bit of much needed guidance I've found my perfect first guitar and would highly recommended PMT and mike in particular Thanks for great experience Gary Douglas
Read Reviews

Customer Reviews

This product doesn't have any reviews yet, why not write one?

Write Your Own Review

Only registered users can write reviews. Please, log in or register