Blackstar Series One 50w Guitar Amp Head

Blackstar Series One 50w Guitar Amp Head

By switching both pre amp and power amp parameters, the Series One delivers Class A style tones. The ISF allows you to tune the tone to exac..

Read More

£999.00
Guitar Purchase at Northampton Sun 4th Dec 16:
Knowledgeable and friendly staff, couldn't do any more to help. All round good experience.
Read Reviews

Overview

By switching both pre amp and power amp parameters, the Series One delivers Class A style tones. The ISF allows you to tune the tone to exactly the sound you are looking for. DPR can reduce the power down to 5W, while the MIDI switching and series effects loop make this the ultimate pro head.

ISF Control

The ISF control works in conjunction with the Tone control. It allows you to choose the exact tone signature you prefer. Fully CCW is a more American characteristic with a tight bottom end and more aggressive middle, and fully CW is a British characteristic which is more ‘woody’ and less aggressive.

DPR Control

The DPR system allows you to vary the amplifier output down to 10% of its rated power without any loss in tone or valve reliability. Pure valve output distortion and compression at any volume - a dream come true.

MIDI Switching

The Series One offers the ability to control channel selection via MIDI Program Change messages and interfacing with most MIDI controllers is a straight forward process. The Series One can be placed in a MIDI chain allowing you to simultaneously select a channel on the amplifier and change the patch on a MIDI effects processor connected to the effects loop. There are 128 available Program Changes, giving you the possibility to access a vast number of tonal combinations.

Solid Construction

All Series One amplifiers have plated through double sided PCBs for the increased mechanical integrity this construction affords. Designed to last a lifetime, Series One cabinets have a 18mm finger-jointed birch ply cabinet and heavy gauge wiring. The chassis, for mechanical integrity, are seam welded 1.6mm steel.

Effects Loop

The amp features an effects loop to allow you to connect effects pedals or other professional equipment using the return and send connections. The Effects Loop Level switch sets the effects loop to either +4dBV/-10dBV, which enables you to use it with either professional equipment (+4dBV setting), or with guitar level effects such as effects pedals (-10dBV setting).

Speaker Emulated Output

The Blackstar emulated output design is a new benchmark for pro direct recording. This no-compromise design makes it easy to get your tone to disk and tape. You can also use it to run a line out to a PA.

  • 50W Watt head with built-in DPR power reduction
  • 1 x ECC82, 3 x ECC83, 2 x EL34 valves
  • Clean channel with Warm (Plexi) and Bright (Class A) type modes
  • Overdrive channel with Crunch and Super Crunch modes
  • ISF equipped tone control section
  • Presence control
  • Master Volume
  • Series effects loop
  • MIDI switching
  • Speaker emulated output

Specification

SKU83612
Weight8.0000
Effectsinfinite shape feature (isf), effects loop, presence & tone
MPNSERIES150
Colourblack
Channels2 channels
Warranty2 years
Power50 watt - 1 x ecc82, 3 x ecc83, 2 x el34 valves
Amp Typevalve / tube amplifier

See It In Action

Now Playing

views

Hear It In Action

No music has been added for this product yet.

Read About It

Guitar Purchase at Northampton Sun 4th Dec 16:
Knowledgeable and friendly staff, couldn't do any more to help. All round good experience.
Read Reviews

Customer Reviews

This product doesn't have any reviews yet, why not write one?

Write Your Own Review

Only registered users can write reviews. Please, log in or register