Blackstar Artist 30 Valve Combo

Blackstar Artist 30 Valve Combo

The new Blackstar Artist 30 Valve Combo is a great, professional tube amp perfect for gigging or recording, and takes fx pedals very well. I..

Read More

£849.00
Guitar Purchase at Northampton Sun 4th Dec 16:
Knowledgeable and friendly staff, couldn't do any more to help. All round good experience.
Read Reviews

Overview

The new Blackstar Artist 30 Valve Combo is a great, professional tube amp perfect for gigging or recording, and takes fx pedals very well. If you care about great tone, the tube sound of this amp will blow your mind!


In keeping with their Artisan heritage, there are two models: a 1x12" 15W combo and a 2x12" 30W combo. Powered with 6L6 valves and Celestion V-Type speakers, these amps deliver pristine Blackstar tone with less gain on Channel 2 making Artist the perfect amps to be used with stomp boxes.

 

At the heart of the Artist 30 lies a unique power amplifier design that harnesses the tonal qualities of the revered 6L6 valve. By carefully optimising the key power amplifier parameters of the Artist 30, the Blackstar design team has created an amplifier which has the outstanding dynamics normally associated with a USA 6L6 design, whilst adding the chime and shimmer of a classic British Class A amplifier.


The Artist 30’s two channels offer the widest possible palette of classic tones. Each channel can be set as either a clean channel or a classic overdrive channel.

Every feature is refined with simplicity and sonic purity in mind. to allow a musician total freedom in shaping their own sound.

Features such as foot switching, reverb, master volume and effects loop augment the sonic experience.

As with all Blackstar products reliability is paramount and the Artist 30 has been subject to countless hours of endurance testing, both in the laboratory and in live performance meaning you can rely on the Artist 30 night after night in the most demanding gig environments.

This flexibility, tone and quality is delivered with a visual elegance worthy of the world’s greatest stages and performers. From the metallic thread in the classic paper fret to the embossed Blackstar detail on the luxury leather carrying strap, nothing has been left to chance in delivering the Artist 30 – A New Classic.

Two Channels

Channel 1 - At low channel volume the amplifier will be completely clean. Increasing the amount of volume will see the amplifier start to break up into a natural mild overdrive response. The Tone control allows adjustment of the balance between treble and bass frequencies within the sound. At low settings (counter clockwise) the sound will be warmer and darker in character. As the Tone control is rotated clockwise the sound will become brighter.

Channel 2 - Channel 2 can be adjusted between a clean and medium overdrive response by adjusting the Gain control. Low settings (counter clockwise) will deliver a clean sound. As the Gain control is increased clockwise the sound will be more harmonically rich until a classic overdrive response is achieved.

ISF Control

The ISF control works in conjunction with the Tone control. It allows you to choose the exact tone signature you prefer. Fully CCW is a more American characteristic with a tight bottom end and more aggressive middle, and fully CW is a British characteristic which is more ‘woody’ and less aggressive.

Digital Reverb

The reverb control sets the overall level of the reverb effect. With the control fully counter clockwise there will be no reverb. Turning the control clockwise will increase the amount of reverb.

Speaker Emulated Output

The Blackstar emulated output design is a new benchmark for pro direct recording. This no-compromise design makes it easy to get your tone to disk and tape. You can also use it to run a line out to a PA.

Effects Loop

The amp features an effects loop to allow you to connect effects pedals or other professional equipment using the return and send connections. The Effects Loop Level switch sets the effects loop to either +4dBV/-10dBV, which enables you to use it with either professional equipment (+4dBV setting), or with guitar level effects such as effects pedals (-10dBV setting).

FS-8 Footswitch

The supplied 2-way footswitch enables you to switch between Channels 1 and 2, and switch the Reverb on or off.

Features:
  • 2 Channels
  • 2x12 Celestion V-Type
  • 2 x 6L6 valves
  • 2 x ECC83
  • Patented ISF
  • Reverb
  • Series effects loop
  • Footswitchable channels and reverb
  • Boutique styling
  • Black covering
  • Black paper fret with silver thread
  • Black chicken head knobs
  • Artisan style panel

Specification

SKU144343
Weight0.0000
MPNARTIST 30

See It In Action

Now Playing

views

Hear It In Action

No music has been added for this product yet.

Read About It

Guitar Purchase at Northampton Sun 4th Dec 16:
Knowledgeable and friendly staff, couldn't do any more to help. All round good experience.
Read Reviews

Customer Reviews

This product doesn't have any reviews yet, why not write one?

Write Your Own Review

Only registered users can write reviews. Please, log in or register