The new Ashdown Rootmaster 800 EVO bass amplifier head has been specifically developed to produce 800 watts of deep low end, defined mids and clear highs that gigging bassist need. The upgraded preamp includes both a passive and active input for use with high an low output instruments allowing a clear input signal that can be monitored by the trademark Ashdown VU meter. A 5 band EQ section, taken from the world famous ABM circuit, gives you total control of your tone allowing surgical tweaks.
Ashdown Rootmaster EVO. More Power, Less Weight.
Instantly add warmth to your bass tone with the onboard one knob compressor. Simple and easy to use the compression makes sure your bass fills out any mix. A footswitchable sub harmonic generator lets you dial in a sub octave and kick it in at any point with ease. A send and return loop can be found on the back panel for your effects pedalboard along with a DI output and a line input for backing track jamming.
A combined Jack/Speakon socket with a minimum 4 ohm load provides flexible partnering options with a dedicated range of Rootmaster EVO cabinets. Ashdown’s 1 x 12”, 1 x 15”, 2 x 10”, 4 x 10” and 6 x 10” cabs all feature Ashdown White Line speakers for a refined tone, plus a high- frequency 3-way controllable tweeter for additional top-end bite.
- Power Output: 800 Watts
- Power Handling: 115 - 230 Volts
- Speaker Outputs: 2 x Speakon
- Frequency Response -3dB at 17Hz and 30kHz
- High Instrument Input: Impedance 3.9m Ohms, input range 150mV - 20mV p-p
- Low Instrument Input: Impedance - 1M ohms Input range 150mv to 10v p - p
- Line Input: Impedance 10k Ohms, input range 300mV - 40V p-p
- DI Output: 600 Ohm balanced / Level -20dBu nominal
- Tuner Output: Impedance 22k Ohms / Level 0dBu nominal
- Impedance: Minimum 4 Ohm
- Signal to noise: Better than 80dB (EQ flat)
- EQ: Bass +/-15dB @ 100Hz Lo Mid +/-15dB @ 220Hz Middle +/-15dB @ 660 Hz Hi Mid +/-15dB @ 1.6kHz Treble +/-15dB @ 7kHz shelving Deep +
- Effects Send: Impedance 22k Ohm / Level 0dBu nominal
- Effects Return: Impedance 22k Ohm / Level 0dBu nominal
- Distortion: Less than 0.5% THD
- H x W x D: 78 x 313 x 225mm
- Weight: 4.5kg
|Effects||eq, compression, overdrive, sub harmonic|
|Amp Type||solid-state amplifier|
We constantly monitor our competitors' prices to ensure that we're the best. However if you do find it cheaper, you can request an instant price match during opening hours by completing the form below.
*Please note that Terms & Conditions apply to Price Match - Must be a UK-based seller with the item In Stock, and is not available in conjunction with Finance or other Offers*